30% OFF EVERYTHING · CODE NOVEMBER30 · ENDS 11/30
Third-Party Tested
COAs Published
Same-Day Fulfillment
US Based

How to Read a Peptide Certificate of Analysis (COA)

Published · Updated

A certificate of analysis (COA) is a lab's report on one specific batch of a compound. It tells you three things: whether the vial contains the peptide it claims, how pure it is, and how much peptide is actually there. For research peptides, the COA is the only independent evidence of what you are working with, so it is worth knowing how to read one properly.

This guide walks through a real Apex Labs certificate, line by line, then covers the warning signs of a COA you should not trust and how to check one yourself.

What a COA is, and what it isn't

A COA describes the batch that was tested, not the product in general. Every vial made from that batch shares a lot number, and the COA should name that lot. A COA from a different lot, or one with no lot at all, tells you nothing about the vial in front of you.

A COA is also only as trustworthy as the lab behind it. Look for an independent, accredited lab rather than a report produced by the seller or the manufacturer itself.

Reading a real COA, line by line

Our example is the certificate for Apex Labs GHK-Cu 50mg, lot LOT-2026-001, tested by ILS Laboratories in San Diego, an ISO/IEC 17025 accredited lab.

COA lineWhat our certificate saysWhat it means
Compound and labeled contentGHK-Cu, 50mgWhat the vial claims to hold. Every other line is checked against this.
Lot numberLOT-2026-001Ties the report to one batch. It should match the lot printed on your vial.
COA number and access codeCOA-2026-FEGD_H, code FBGP5YF2Lets you look the report up on the lab's own portal, so you aren't relying on a PDF someone sent you.
Analysis date08/06/2026When the sample was tested. Recent dates matter more for compounds that degrade.
Identity (HPLC-RTM)Confirmed, PASSThe sample's retention time matched a reference standard of GHK-Cu, so the vial holds the right compound.
Peptide purity (HPLC)99.68%, spec ≥95.0%, PASSThe share of peptide material that is the target peptide.
Net peptide content53.19 mgThe actual mass of peptide measured in the vial, reported for information.
Fentanyl screenNot detected at 50 ng/mL, PASSA contamination safety screen the lab runs on every sample.

Purity and net peptide content are different numbers

This is the line most people misread. Purity answers "of the peptide material in this vial, how much is the right peptide?" On our certificate it is measured by reverse-phase HPLC, reading UV absorbance at 214 nm. The target peptide's peak is compared with every other peptide-related peak, such as truncated or modified sequences left over from synthesis.

Net peptide content answers "how much peptide is actually in the vial?" A lyophilized peptide is never 100% peptide by weight: it also carries counter-ions and residual water. That is why a vial labeled 50mg can show a net content a little above or below 50 mg, and why a high purity figure alone doesn't tell you the quantity.

A strong COA reports both. A COA that shows only a purity percentage leaves the quantity question unanswered.

Tests some COAs add

Other labs and other compounds may show extra lines. Mass spectrometry confirms identity by molecular weight, a second check alongside HPLC retention time. Purity and identity answer different questions, and we explain what each test can and can't tell you in a separate guide. Endotoxin testing, in EU/mg, measures bacterial contamination. Residual solvents checks for chemicals left over from synthesis. More tests are not automatically better, but each one should name its method, its specification and its result.

Red flags: when not to trust a COA

  • No lot number, or a lot that doesn't match the vial. The report may describe a different batch entirely.
  • No lab name, address or accreditation. An unnamed lab cannot be checked or held accountable.
  • No way to verify it. Reputable labs give each report a number or access code you can look up on their own site.
  • Purity only, with no method. "99%" means little without the method (such as HPLC) and the specification it was tested against.
  • The same report on every product. One generic certificate reused across a whole catalog is not batch testing.
  • Round, perfect numbers everywhere. Real results look like 99.68% or 53.19 mg, not 100% and 50.00 mg on every line.
  • Signs of editing. Mismatched fonts, blurred areas around numbers, or dates that don't line up with the lot.

How to verify a COA yourself

  1. Match the lot number on the COA to the lot on your vial.
  2. Find the lab's name and confirm it is independent of the seller.
  3. Use the COA number or access code on the lab's own portal, not a link the seller provides.
  4. Check that the identity test names the compound you ordered, and that each result is marked against a specification.
  5. Compare the net peptide content with the labeled amount.

How Apex Labs publishes lab results

Every certificate we publish comes from ILS Laboratories, an independent ISO/IEC 17025 accredited lab, and names its lot, test date and access code. We post certificates on our Lab Results page and on each product page as each batch is verified, so you can check the report before you order.

See our current lab results →

All Apex Labs products are sold strictly for laboratory research use only. They are not for human or animal consumption, and nothing on this page is medical advice.